EXFO Power Blazer 88200NGE, User Manual

Page: 21 / 887

Power Blazer
11
3 Getting Started
If the module has been purchased at the same time as the platform, the
module is pre-installed with the appropriate software version.
Number of Dedicated Modules per Platform
The following table lists the maximum number of dedicated modules that
can run simultaneously on each platform.
Inserting and Removing Test Modules
Note: Refer to the platform user guide for more information on how to
insert/remove a module into/from the platform.
Platform 88200NGE 88260 88400NGE/88460 8870/8880
FTB-2 NA NA NA 2
FTB-2 Pro 2 2 NA 2
FTB-4 Pro 4 4 1
a
a. The platform needs to be connected to a power outlet since this module requires too
much power to run on battery power.
4
LTB-8 8 8 2 8
C
AUTION
There is no need to turn off your unit before inserting or removing
FTBx- modules.
However, inserting/removing modules without following the
instructions provided in the platform user documentation could
result in the following consequences, depending on the operation
underway when the modules are inserted/removed:

unexpected behavior of the test applications,

instability of the system,

or cause irreparable damage to your modules.