EXFO Power Blazer 88200NGE, User Manual

Page: 200 / 887

Test Setup - Test Configurator, Timer, and System
190
88000 Series
EtherBERT, FC BERT, BERT (eCPRI, CPRI/OBSAI, and FlexE), and Unframed BERT
Quantity allows selecting 2 to 8 frame size values.
EMIX Frame Sizes
allows setting the EMIX frame sizes. The
minimum frame size value is adjusted according to the frame
structure and components selected as shown in the above table.
Restore Default button reverts the quantity and EMIX frame sizes
to their default values.
Note: The following frame parameters are only available for OTN BERT test
application with Ethernet client (EoOTN).

Source MAC Address is the module default and unique Source Media
Access Control (MAC) address that is automatically given to the
stream. Tap the
Source MAC Address field if the stream MAC address
has to be changed and enter the new MAC address.

Destination MAC Address is the destination MAC address for the
stream. The default setting is the MAC address of the port. Tap the
Destination MAC Address field if the stream MAC address has to be
changed and enter the new MAC address.

VLAN ID check box, when selected (cleared by default), allows the
configuration of the following VLAN parameters. Selecting the VLAN
check box affects the
Frame Size value.

VLAN ID
sets the VLAN ID. Choices are
0
through
4095
(default
is 2 ). Refer to VLAN ID and Priority on page 842 for more
information.

Priority sets the VLAN user priority. Choices are 0 (default) to 7 .
Refer to
VLAN ID and Priority
on page 842 for more information.

Type indicates the supported VLAN Ethernet type which is 0x8100 .