EXFO Power Blazer 88200NGE, User Manual

Page: 192 / 887

Test Setup - Test Configurator, Timer, and System
182
88000 Series
eCPRI Flow - Profile
QoS Thresholds
Note: For Dual Port topology in One-Way P<m>  P<n> , these settings are
coupled.

Global Pass/Fail Verdict check box when selected (default) allows
enabling and configuring each metrics individually, otherwise all
pass/fail verdicts are disabled.

Latency
check box when selected (default) enables the latency
pass/fail verdict and allows setting the maximum threshold delay
per direction when applicable.
For One-Way Latency:
1 to 500 000 μ s (default is 100 μ s ).
For Round-Trip Latency:
1
to
1000 000 μ s
(default is 200
μ s
)

Jitter check box when selected (default) enables the jitter pass/fail
verdict and allows setting the maximum threshold value per
direction when applicable:
1 to 500 000 μ s (default is 10 μ s ).

Frame Loss
Rate check box when selected (default) enables the
Frame Loss pass/fail verdict and allows setting the frame loss rate
for the port: 0.0E-00 to 5.0E-02 (default is 1.0E-07). However
entering a value of 0.0E-00 or below 1.0E-14 is treated as a pass/fail
verdict based on loss count instead of rate.

Throughput check box when selected (default) enables the
throughput pass/fail verdict and allows setting the minimum and
maximum threshold values for the port.