EXFO Power Blazer 88200NGE, User Manual

Page: 130 / 887

Test Setup - Test Configurator, Timer, and System
120
88000 Series
Modify Structure Button

Port1 - QSFP28
,
Port2 - QSFP28
,
Port3 - QSFP28
, and
Port4 - QSFP28
check boxes (selected by default), available with FlexO BERT,
indicates the Power Blazer’s ports used for the test.

Connector allows the selection of the module’s port. For decoupled
topology on 88260, TX and RX connectors are forced on the same
transceiver system.
PDH E1 [2.048 Mbit/s]
E3 [34.368 Mbit/s]
E4 [139.264 Mbit/s]
NI/CSU Emulation DS1
Interface/Rate
Connector
a
8870/8880 88200NGE 88260
OTU4 (4 Lanes) [111.81 Gbit/s] - Port 1 - CFP4
Port 2 - QSFP
b
Port A1/A2/B1/B2 - QSFP28
Port A1/B1 - CFP4
OTU3e2 (4 Lanes) [44.583 Gbit/s]
OTU3e1 (4 Lanes) [44.571 Gbit/s]
OTU3 (4 Lanes) [43.018 Gbit/s] - Port 2 - QSFP
b
Port A1/A2/B1/B2 - QSFP28
OTU2 [10.709 Gbit/s]
OTU1e [11.049 Gbit/s]
OTU2e [11.096 Gbit/s]
OTU1f [11.270 Gbit/s]
OTU2f [11.318 Gbit/s]
OC-192 [9.953 Gbit/s]
STM-64 [9.953 Gbit/s] Port 1 - SFP+
c
Port 1 - SFP+ Port A1/A2/B1/B2 - SFP28
OTU1 [2.666 Gbit/s]
OC-48 [2.488 Gbit/s]
OC-12 [622.08 Mbit/s]
OC-3 [155.520 Mbit/s]
OC-1 [51.840 Mbit/s]
STM-16 [2.488 Gbit/s]
STM-4 [622.080 Mbit/s]
STM-1 [155.520 Mbit/s]
STM-0 [51.840 Mbit/s]
Test Interface/Rate