EXFO Power Blazer 88000 Series, User Manual

Page: 535 / 803

Test Results
Power Blazer
523
Summary (Wander)
Note: The following statistics are collected without any filtering.

cTE (ns)
indicates the constant time error which is an average value of
time error over the defined period as follows (refer to cTE Averaging
Period
on page 339):

since the beginning of the test when the cTE Average Period is set
to
Elapse Time
.

for the averaging period defined when the cTE Average Period is
set to a value other than the
Elapse Time
. The first value is only
available after the initial average period has elapsed, the value is
then updated every second.

Max cTE (ns) indicates the maximum cTE value collected since the
beginning of the test. The pass/fail verdict is also displayed when
enabled.

MTIE
and
TDEV
pass/fail verdict icons are displayed when enabled.
Time Interval Error Statistics
The following statistics are not available with 1PPS rate.

TIE (ns) is the Time Interval Error value collected in the last second.

Max TIE (ns)
is the Maximum Time Interval Error value collected since
the beginning of the test.

Min TIE (ns)
is the Minimum Time Interval Error value collected since
the beginning of the test.

Max TIE pk-pk (ns)
is the maximum Time Interval Error peak-to-peak
since the beginning of the test.