EXFO Power Blazer 88000 Series, User Manual

Page: 504 / 803

Test Results
492
88000 Series
Summary (iOptics)

Optical TX Power Test (dBm) reports the minimum and maximum
optical TX power values; in-range values are displayed in green while
out-of-range are in red.

Optical RX Power Test
(dBm) reports the minimum and maximum
optical RX power values; in-range values are displayed in green while
out-of-range are in red.

Bit Error Test reports the bit error count; count value smaller or equal
to the BER threshold is displayed in green while bigger value is in red.

Excessive Skew Test reports the highest skew value monitored during
the sub-test; a value smaller than the threshold is displayed in green
while a value crossing the threshold is in red. Only available for parallel
interfaces with the exception of transceivers using RS-FEC
(100GBASE-SR4, 100GE-CWDM4, 100GE-CLR4).
Monitoring

Power Consumption graphically displays a meter representing the
transceiver power consumption in Watt. Not available on 8870 and
8880 modules.
The
Current (A)
and
Power (W)
values (
Actual
and
Maximum
) for
3.3V source are displayed.

Temperature
graphically displays a meter representing the transceiver
temperature in
o
C.
The current (
Actual
) and maximum temperature values are also
displayed.
Note:
The green region is delimited from 0 to the Threshold corresponding to a
PASS verdict. The red region beyond the threshold corresponds to a FAIL
verdict.