EXFO Power Blazer 88000 Series, User Manual

Page: 320 / 803

Test Setup - Test Configurator, Timer, and System
308
88000 Series
Signal - Signal Configuration (SONET/SDH)

REI-L/MS-REI Computation Method (OC-192/STM-64 only): Allows
selecting the default method used to calculate the REI-L/MS-REI error
for OC-192 and STM-64 signals. Choices are
M1 Only and both M0 and
M1
. The default setting is M1 only.
STS/AU and VT/TU Mappings

Timeslot
/
Number
Timeslot (SONET) allows the selection of the STS timeslot number.
Refer to
SONET Numbering Convention
on page 749 for more
information.
Number
(SDH) allows the selection of the AU channel number. Refer
to SDH Numbering Convention on page 750 for more information.

TCM
check box when selected (cleared by default) allows Tandem
Connection Monitoring (TCM).

TC-UNEQ-P / TC-UNEQ-V / HPTC-UNEQ / LPTC-UNEQ
check boxes
when selected (cleared by default) allows the monitoring of the
corresponding Tandem Connection - Unequipped alarm. Only
available when the
TCM check box is selected.

Overwrite Fixed Stuff
(STS-1 only) check box when selected (default)
fills up the bytes of the STS-1 SPE’s columns 30 and 59 with the
selected pattern from the tab
BERT and Unframed BERT
on page 139.

Background allows the selection of the high order path background
traffic:
AIS
,
Equipped
(PRBS23) - (default), or
Unequipped
.