manualshive.com logo in svg

EXFO MAX-800 Series, User Manual, Page: 400 / 495

Share
Download
EXFO MAX-800 Series User Manual Download Page 400

Test Control

392

MAX-800 Series

Report Button

Report Button 

The report contains all information about the current test including its 
setup and results. 

Note:

Nothing prevents the configuration and alarm/error injection setup while 
the test has been stopped; thus, the report should be saved/printed before 
changing any test parameters to avoid printing discrepancy between the 
configuration and results. 

The 

Report

 button is available when the test is running or stopped, but the 

report generation is only possible when the test is stopped. It is possible to 
save, open, import, export, and delete test report(s). 

File Location 

Public Documents

: 

Users\Public\Documents\800-MaxTester\Reports 

My Documents

: 

Users\<User>\Documents\800-MaxTester\Reports 

Others

, use 

Browse

 to select a specific file location that will be 

displayed under 

Others

. 

Removable Drives

 is only available when there is a removable 

disk/key connected to the MAX-800 Series USB port. 

Summary of Contents for MAX-800 Series
















































































































































































































































































































































































































































































































Reviews:

No comments