manualshive.com logo in svg

EXFO MAX-630G, User Manual

Share
Download
EXFO MAX-630G User Manual Download Page 37

Setting Up the MAX-630G

G.fast/VDSL2/ADSL2+ Multi-play Test Set

31

Upload Setup

Upload Setup

Upload Enable

The 

Upload Enable

 function allows you to upload 

your test result files.
The 

Out-band Upload Method

 allows you to use one 

of the following methods:

Wi-Fi

 allows you to upload files from the 

MaxTester via a Wi-Fi hotspot/router and is 
available from the following results pages:

Upload/Save Result

 tab

Result Manager

/

Upload

Note:

Only channels 1 to 11 are supported on the Wi-Fi 
hotspot/router.

A Wi-Fi symbol, in the top right-hand corner of the navigation bar, 
identifies whether or not a connection is present. The Wi-Fi status is 
indicated as follows:

Green icon indicates that the MaxTester is connected with a Wi-Fi 
hotspot.

Yellow icon indicates that the Wi-Fi dongle is powered up and ok, 
but that the MaxTester is not connected to any Wi-Fi hotspot.

Red icon indicates a problem with the Wi-Fi (dongle not attached, 
etc.).

Summary of Contents for MAX-630G

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands