EXFO LTB-8, User Manual

Page: 22 / 402

Safety Information
14
LTB-8
Laser Safety Information
Laser Safety Information
Your instrument is a Class 1M laser product in compliance with standards
IEC 60825-1: 2007 and 21 CFR 1040.10, except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007. It is also in compliance with IEC
60825-1: 2014. Laser radiation may be encountered at the output port.
Refer to the user documentation of the different modules for the relevant
laser safety information.
The modules and instruments that you use with your unit may have
different laser classes. Refer to their user documentation for the exact
information.
Electrical Safety Information
This unit uses an international safety standard three-wire power cable. This
cable serves as a ground when connected to an appropriate AC power
outlet.
W
ARNING
Viewing the laser output with certain optical instruments (for
example, eye loupes, magnifiers, and microscopes) within a
distance of 100 mm may pose an eye hazard.
W
ARNING

If you need to ensure that the unit is completely turned off,
disconnect the power cable.

Use only the certified power cord that is suitably rated for the
country where the unit is used.

Replacing detachable MAINS supply cords by inadequately
RATED cords may result in overheating of the cord and create a
risk of fire.