EXFO IQS-9100, User Manual

Page: 23 / 99

Optical Switch
17
2 Getting Started with Your
Optical Switch
Inserting and Removing Test Modules
To insert a module into the controller or expansion unit:
1.
Exit IQS Manager and turn off all your units.
2.
Remove the protective cover from the desired unused module slot.
2a. Pull the retaining screw knob firmly towards you and release the
bottom of the cover.
2b. Gently pull the top of the protective cover downwards, to remove
it from the unit grooves.
C
AUTION
Your Optical Switch contains sensitive precision optical
components. To ensure reliable, long-term service, observe proper
handling and operating instructions. At no time should the module
be subject to shock or impact.
C
AUTION
Never insert or remove a module while the controller unit and its
expansion units are turned on. This will result in immediate and
irreparable damage to both the module and unit.