Physical Interfaces and LEDs
24
IQS-8500 Series and IQS-8120NGE/8130NGE
IQS-8525 and IQS-8535 Models
Carefully connect optical fiber cables to the XFP’s IN and OUT ports. To
ensure good signal quality, make sure that the optical fibre connector is
fully inserted into the optical connector port.
Note:
Do not replace an XFP while the test is running to avoid distorting results.
First stop the test, replace the XFP, and then restart the test.
Note:
Only use EXFO supported XFPs. Using non-supported XFPs can affect the
performance and accuracy of the optical port.
Carefully connect optical fiber cables to the XFP’s IN and OUT ports. To
ensure good signal quality, make sure that the optical fibre connector is
fully inserted into the optical connector port.
Note:
Do not replace an XFP while the test is running to avoid distorting results.
First stop the test, replace the XFP, and then restart the test.
Note:
Only use EXFO supported XFPs. Using non-supported XFPs can affect the
performance and accuracy of the optical port.
C
AUTION
To prevent exceeding the maximum input power level, please use
an attenuator when a loopback configuration is used.
C
AUTION
To prevent exceeding the maximum input power level, please use
an attenuator when a loopback configuration is used.
