RFC 2544 Tabs
Ethernet and Fibre Channel Application
305
Throughput
Configuration
Test Time (MM:SS)
: Enter the test time value. Possible values are
1
second to
30
minutes. The default setting is
1
second (00:01).
Accuracy
: Enter the accuracy value. The accuracy is not based on the
the configured
Maximum Rate
but on the Ethernet line rate.
The default setting is
1%
. Possible values are:
Select the Accuracy measurement unit. Choices are
%
,
Gbps
, and
Mbps
. The default setting is
%
.
Nb. of Acceptable Errors
: Select the number of acceptable errors for
the test. Choices are
0
to
10
errors. The default setting is
0
error.
Nb. of Trials to Average
: Select the number of times the throughput
test will be generated. Choices are
1
to
50
trials. The default setting is
1
trial.
Nb. of Validations
: Select the number of times the result should be
validated. Choices are
1
to
50
times. The default setting is
1
time.
Interface
Accuracy
%
Gbps
MBps
10 Mbps
0.1
to
10
0.00001
to
0.001 0.00125
to
0.125
100 Mbps
0.1
to
10
0.0001
to
0.01
0.0125
to
1.25
1000 Mbps
0.1
to
10
0.001
to
0.1
0.125
to
12.5
10 Gbps
0.1
to
10
0.01
to
1
1.25
to
125
