Port Tabs
Ethernet and Fibre Channel Application
149
Interface Setup (Fibre Channel)
Buffer-to-Buffer Flow Control
Enable
: The
Enable
check box is forced selected when
Login
is
selected. The IQS-8500 Series and IQS-8120NGE/8130NGE will send a
Received Ready (R_RDY) automatically after receiving a frame when
the Enable check box is selected.
Note:
Since R_RDY are inserted between frames and have higher priority, in
certain condition they may affect the TX throughput.
Available BB_Credit
is the number of frame buffers that the remote
port has available to receive frames from the local port.
Available
BB_Credit
is not editable when either the
Enable
or
Enable
login
check box is selected. Choices are from
1
to
65535
. The default setting
is
10
.
Note:
After a Login process, the Available BB_Credit displays the value received
from the remote interface through the login process.
World Wide Name
Only available when Enable Login is enabled.
Source
: Enter the World Wide Name source address.
Destination
: The destination Worldwide Name will be displayed and
grayed-out after the Login process when Point-to-Point is selected.
Enter the Worldwide name destination address.
