Creating and Starting a Test Case
Ethernet and Fibre Channel Application
109
Ethernet Smart Loopback Test Case
Ethernet Smart Loopback Test Case
Allows transmitting back the received Ethernet stream of data while
interchanging the source and destination addresses of the
MAC
and
IP
, in
addition to the source and destination ports for
UDP
and
TCP
layers.
To create a Smart Loopback test case:
1.
Test configuration:
1a.
Select
Ethernet 10/100/1000
or
Ethernet 10G
as the
Interface Type
.
Interface Type
is not available with
IQS-8510G.
1b.
Select
Single Port
as the
Topology
. Topology is only available
with IQS-8510B.
1c.
Select
Smart Loopback
as the
Application Type
.
1d.
Press
Next
.
1e.
Select the port
Connector
Type (Optical
or
Electrical RJ-45
).
Optical
is automatically selected for the
Ethernet 10G
interface.
