EXFO IQS-600 Series, User Manual

Page: 78 / 379

Setting Up Your Integrated Qualification System
70
IQS-600
Deactivating the LED Display
Deactivating the LED Display
Note: This feature is not available in offline mode.
Your testing environment may require total darkness and you do not want
any LED or light activity that could compromise your test results.
Note:
The backlight does not automatically turn off. You must adjust it as
explained above.
To deactivate the LED display:
1.
Select the
Utilities
function tab, and then select the
System
tab.
2. Click the Settings button.
3. Under
IQS Settings
, select
Turn off All Lights
.
4.
Click Apply to confirm, or Close to exit and discard the new settings.