Getting Started with Your Light Source
Light Source
15
Exiting the Application
Data Display
In addition to the
Control Center
, the main window also contains the data
display, where the source status indicator, as well as values for wavelength,
modulation, and attenuation controls are shown (see figure below).
Exiting the Application
Closing any application that is not currently being used helps freeing
system memory.
To close the application from the main window:
Click
in the top right corner of the main window.
OR
Click the
Exit
button located at the bottom of the function bar.
To close all currently running applications:
From IQS Manager, click
Close All Applications
.
Source
status
indicator
Nominal wavelength
Attenuation
value
indicator
Modulation
value
indicator
