EXFO IQS-1700, User Manual, Page: 67 / 204

Performing Acquisitions
High Performance Power Meter
59
Selecting the Sampling Type
To select a sampling type:
1.
From the Settings function tab, select the Data Acquisition tab.
2. Select the sampling type by clicking the corresponding button.
If you select
Continuous
, select the rate to use with the arrow buttons.
This rate is a divider of the maximum rate (5208 Hz). For example,
5208 Hz has a divider of 1, 2604 has a divider of 2 and so forth. To add
or remove dividers from the list of available values, see
Editing the
Frequency Divider List
on page 61.