EXFO IQS-1700, User Manual, Page: 34 / 204

Setting Up Your High Performance Power Meter
26
IQS-1700
Managing Wavelength Lists
Managing Wavelength Lists
The wavelengths you want to use with your IQS-1700 and OHS-1700 must
be entered in the
Wavelength list. Please refer to the Certificate of
Compliance supplied with your power meter for information on the
wavelength range.
To add a wavelength to the list:
1.
From the
Settings
function tab, select the
Lists
tab.
2. In the
Wavelength
list, enter the wavelength value to be added.
You can enter a value with a 0.01 nm resolution.
3. Click to confirm the new wavelength.
Note: A warning message is displayed if the new wavelength is not within the
power meter’s wavelength range.