manualshive.com logo in svg

EXFO IQS-1700, User Manual, Page: 106 / 204

Share
Download
EXFO IQS-1700 User Manual Download Page 106

Troubleshooting

98

IQS-1700

Contacting the Technical Support Group

Contacting the Technical Support Group

To obtain after-sales service or technical support for this product, contact 
EXFO at one of the following numbers. The Technical Support Group is 
available to take your calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. 
(Eastern Time in North America).

 

For detailed information about technical support, and for a list of other 
worldwide locations, visit the EXFO Web site at 

www.exfo.com

.

If you have comments or suggestions about this user documentation, you 
can send them to [email protected].

To accelerate the process, please have information such as the name and 
the serial number (see the product identification label), as well as a 
description of your problem, close at hand.

Technical Support Group

400 Godin Avenue

Quebec (Quebec) G1M 2K2

CANADA

1 866 683-0155 (USA and Canada)

Tel.: 1 418 683-5498

Fax: 1 418 683-9224

[email protected]

Summary of Contents for IQS-1700













































































































































































































Reviews:

No comments