EXFO FTB-860, User Manual

Page: 64 / 409

EtherSAM Test Setup and Results
52
FTB-860/880
Ramp Configuration
Ramp Configuration
You can ramp a service into multiple steps to reach and exceed the
Committed Information Rate using
Ramp tab. The ramp defined in this tab
is used in the Service Configuration Test. The ramp parameters are
common to all Services, in both directions. If EIR is enabled in one
direction, it is also enabled on the other direction. The EIR can be enabled
or disabled per Service. The X axis shows the time and the Y axis shows
the percentage of the CIR.
Note: EIR is part of the step list as soon as it is enabled for at least one service.
However, the EIR step will only be part of the test for services that have the
EIR check box selected.
From the
Test
menu, press
Setup
, and the
Ramp
tab.