EXFO FTB-860, User Manual

Page: 28 / 409

Physical Interfaces and LEDs
16
FTB-860/880
CPRI/OBSAI 2.0457/3.072 Gbit/s Optical Port
CPRI/OBSAI 2.0457/3.072 Gbit/s Optical Port
The FTB-860, FTB-860G, and FTB-880 provide one optical port for
CPRI/OBSAI 2.0457/3.072 Gbit/s testing.
The optical port is Small Form Factor Pluggable (SFP) slot type (Duplex LC
connector).

Insert one of the following SFP modules into the optical slot

Carefully connect optical fiber cables to the IN and OUT ports of SFP. To
ensure good signal quality, make sure that the optical fiber connector is
fully inserted into the optical connector port.
LEDs
EXFO Part
Number
Description
FTB-8590 GigE/FC/2FC, PRI/OBSAI 2.45/3.07 Gbit/s, 850 nm, <500 m
FTB-8190 155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC,
CPRI/OBSAI 2.45/3.07 Gbit/s, 1310 nm, 15 km
FTB-8191 155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC,
CPRI/OBSAI 2.45/3.07 Gbit/s, 1310 nm, 40 km
FTB-8192 155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC,
CPRI/OBSAI 2.45/3.07 Gbit/s, 1550 nm, 80 km
LED Status Description
LASER
(Red) On An optical signal is generated
Off No optical signal is generated
LINK/ACT
(Green) On An optical signal is received
Off Loss of signal (LOS)