EXFO FTB-860, User Manual

Page: 277 / 409

Test Control
NetBlazer
265
Report Button

Save Report

File Name
: Enter the name of the report to be generated. By
default, the name of the report will contain the name of the test,
the date (YY_MM_DD), and the time (HH_MM_SS).

Save To : Select the media where the report file will be saved.
Choices are
Internal Flash
or
Removable Disk. Removable Disk
option is available only when there is one connected to the FTB-1
USB port. The default value is
Internal Flash
.
When Internal Flash is selected, the report file will be in
My Documents\810-880-NetBlazer\Reports
or
My Documents\860-NetBlazer\Reports .

Format
: Select the file format for the report. Choices are
PDF
and
Text . The default setting is PDF .

Logo
: For the PDF file format, the report can include a logo. Enable
the Logo check box and select the logo picture that will be
displayed on the report.
To add a new logo, copy the logo picture file to the following
folder:
My Documents\810-880-NetBlazer\Reports\Images or
My Documents\860-NetBlazer\Reports\Images
.
Supported picture file formats are jpg, gif, bmp, and png.
Display Report after Saving
: automatically displays the report
once it is generated. This check box is selected by default.
Note:
Once generated, the report can be opened from the Open Tab
on page 266
.

Turn on Report Generation Prompt displays a pop-up every time
a test case is stopped or completed to ask if a report generation is
desired. This check box is selected by default.

Save Report
button: Press the
Save Report
button to generate and
save the report. The report will be saved on the selected media
(
Save to
).