EXFO FTB-860, User Manual

Page: 275 / 409

Test Control
NetBlazer
263
Report Button
Config/Save Tab
The Config/Save tab allows to configure the report parameters and
generate/save the report.
Press the Report button and select the Config/Save tab.

Job Information : These parameters are used to identify the source of
the report and are not mandatory. Enter the following job information if
required:
Job ID , Circuit ID , Contractor Name , Customer Name ,
Operator Name
, and
Comment
. Up to 30 characters are allowed for
each parameter at the exception of Comment for which 256 characters
are allowed.

Restore Default : Reverts all Job Information and Report Content
parameters back to the default values.

Report Headlines and Content : These parameters are used to identify
the report and are not mandatory. Enter the following report
parameters if required. Up to 30 characters are allowed for each
parameter.

Report Header : The report header could be the company name
for example, and could be up to 30 characters long.