EXFO FTB-7000 Series User Manual Download

Page: 98 / 339

Testing Fibers in Fault Finder Mode

FTB-7000 Series

Enabling or Disabling the Storage Feature

Enabling or Disabling the Storage Feature

By default, the

Quick Save

button is displayed in the button bar. However,

if you only want to perform quick tests without having to save the results,
you may prefer to hide the

Quick Save

button.

To enable or disable the storage feature:
1.

From the button bar, press

Setup

, then go to the

General

tab.

If you want to hide the

Quick Save

button, select the

Disable storage features

check box.

If you want to display the button, clear the check box.

Press

Exit Setup

to return to the main window. The changes are

applied automatically.

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands