EXFO FTB-1, User Manual

Page: 420 / 675

Test Results
408
FTB-700G/800 Series
Summary (FC BERT)
Summary (FC BERT)
From the
Test
menu, tap
Results
, and the
Summary
tab.

Test Status indicates the actual test status as follows.

“--”: The test is not running or results are not available.

In Progress : The test is running.

Completed
: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Once the test is stopped, the test pass/fail verdict is displayed next to
the
Status field when enabled. The verdict is Pass when all verdicts are
Pass, the verdict is Fail as soon as one of the verdict is Fail. Refer to
Bit/Pattern Error on page 130 and Latency Tag Insertion on page 132 for
more information.

Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.

Power Recovery when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the
Power Recovery field. Refer
to
Power Failure Recovery
on page 559.

Logger Full , when displayed, indicates that the logger is full. Refer to
Logger and Alarms/Errors Logger
on page 362.