EXFO FTB-1, User Manual

Page: 285 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
273
Streams - Profile

Frame Loss Count/Rate check box when selected enables the Frame
Loss pass/fail verdict and allows to set threshold of frame that are lost.
For Count , enter the maximum count of frame that are lost before
declaring a fail verdict:
0
(default) to
9999999999
.
For Rate , enter the maximum rate of frame that are lost before
declaring a fail verdict:
1.0E-14
(default) to
1.0E00
.

Out-of-Sequence Count/Rate check box when selected enables the
Out-of-Sequence pass/fail verdict and allows to set the threshold of
frames that are Out-of-Sequence.
For
Count
, enter the maximum count of frames that are
Out-of-Sequence before declaring a fail verdict: 0 (default) to
9999999999
.
For Rate , enter the maximum rate of frames that are Out-of-Sequence
before declaring a fail verdict:
1.0E-14
(default) to
1.0E00
.

Jitter (ms) check box when selected enables the Jitter verdict and
allows to set the maximum Jitter in ms before declaring a fail verdict.

Latency (ms) check box when selected enables the Latency verdict
and allows to set the maximum Latency in ms before declaring a fail
verdict.