EXFO FTB-1, User Manual

Page: 185 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
173
MAC/IP/UDP
Modify Frame Structure
Allows to modify the structure of the frame.

Global Option
is only available with EtherSAM and Traffic Gen & Mon
test applications.

S-OAM
check box when selected, enables EtherSAM over service
OAM at Layer 2 on all services. The EtherSAM uses LBM and LBR
messages of the S-OAM protocol to perform the test. A device
having the capability to loopback LBM messages (via LBR) is
required at the remote. Only available with EtherSAM. Not available
in Dual Test Set.

Layer Mode
sets the frame layer mode for all services (available
with EtherSAM when the S-OAM check box is cleared):
Mixed
(default) allows configuring the frame layer per service: L2,
L3, or L4.
L2 Only
configures all services to Layer 2 only (no IP, no MPLS).

IP Version allows to select IPv4 (default) or IPv6 that will be used
for both the interface and streams/services.

Framing

Frame Format
(layer 2) allows to select
Ethernet II
(default) or
802.3 SNAP as the frame format.

Network Layer
1 , 2
(layer 3) sets the network traffic type:
IPv4 (default)/ IPv6 , or None .
1. Not available with EtherSAM when the
S-OAM
check box selected.
2. Not configurable and set to None when Layer Mode is set to L2 Only .