EXFO FTB-1, User Manual

Page: 163 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
151
Interface (Ethernet, Packet Sync, Fibre Channel, and Wireless)
For Fibre Channel test application:

PSP (Link Protocol)
(Primitive Sequence Protocol) check box when
selected (default) allows link management by activating the port.
For CPRI
Unframed
test application:

Scrambling check box when selected (default) enables the scrambler.
Only available with
Unframed
CPRI rates 4.9152 Gbit/s and higher.
For CPRI Framed L2 test application:

Sequence
indicates the last Startup Sequence State:
Standby (A)
,
L1 Sync (B) , Protocol (C) , L2 C&M (D) , Vendor (E) , Operation (F) ,
or
Passive (G)
.

Protocol defines how the CPRI Startup Sequence negotiates the
protocol version.

Auto can use protocol Version 1 and Version 2 during the
negotiation.

Version 1 negotiates the protocol with Scrambling disabled.
Available with all supported CPRI rates.

Version 2 negotiates the protocol with Scrambling enabled.
Available with CPRI rates: 9.8, 6.1, and 4.9 Gbit/s.
Protocol table indicates either the last received ( Version 1 or Version
2
) or negotiated (
Auto
) protocol version. A light-red background
indicates a Protocol version mismatch between the received value and
the expected generated value.