EXFO FLS-5834A, User Manual

Page: 29 / 98

Controlling the Source Remotely
CD/PMD Analyzer Source
23
Setting the Remote Command Mode
Setting the Remote Command Mode
To remotely control the CD/PMD Analyzer Source, you must set a GPIB
address or activate the RS-232 port.
To set a remote command mode:
1.
Press the Setup key.
2.
Use the up/down or left/right arrow keys to select RS232 / GPIB . The
current setting is displayed.
Note: If GPIB is currently selected and you want to specify a GPIB address, see
Setting the GPIB Address
on page 24
.
3. Press ENTER to access the RS232 / GPIB edit box.
4. Use the up/down arrow keys to toggle between
GPIB
and
RS232
.
5.
Press ENTER to confirm.
If you selected
RS232
, the
GPIB Addr.
menu option is deactivated (
N.A .
is
displayed).
If you selected
GPIB
, the
Baud Rate
and
Flow Ctrl
menu options are
disabled ( N.A . is displayed). If necessary, you can change the GPIB address.
Refresh Rate
Backlight
Contrast
Video Mode
Exit
8 Hz
ON
STD
RS232 / GPIB
GPIB Addr.
Baud Rate
Flow Ctrl
GPIB
12
N.A.
N.A.