EXFO FLS-5834A, User Manual

Page: 13 / 98

Safety Information
CD/PMD Analyzer Source
7
Electrical Safety Information
W
ARNING
³
Use this unit indoors only.
³
Position the unit so that the air can circulate freely around it.
³
Operation of any electrical instrument around flammable gases
or fumes constitutes a major safety hazard.
³
Do not remove unit covers during operation.
³
To avoid electrical shock, do not operate the unit if any part of
the outer surface (covers, panels, etc.) is damaged.
³
Only authorized personnel should carry out adjustments,
maintenance or repair of opened units under voltage. A person
qualified in first aid must also be present. Do not replace any
components while power cable are connected.
³
Use only fuses with the required rated current and specified
type (IEC, 5 mm x 20 mm (0.197 in x 0.787 in), fast-blow, 250 V,
2 A). Do not use repaired fuses or short-circuited fuse holders.
³
Capacitors inside the unit may be charged even if the unit has
been disconnected from its electrical supply.