EXFO FLS-2600B, User Manual, Page: 83 / 157

Remote Control
Tunable Laser Source
75
Communication Parameters
Communication Parameters
Note: EOS means “ End of String ”. EOI means “ End or Identify ”.
For GPIB Communication
Terminate Read on EOS Yes
Set EOI with EOS on Writes Yes
Type of compare on EOS 8 bits
EOS byte 0Ah
Sens EOI at end of Writes Yes
GPIB primary address See
Setting the FLS-2600B for
Remote Control
on page 71
GPIB secondary address None
For RS-232 Communication
EOS bytes 0Ah
Baud rate 1200/2400/4800/9600/
19200 bps
Parity None
Data bits 8 bits
Stop bits 1 bit
Flow control Software (xOn/xOff) or
None
Activation See
Setting the FLS-2600B
for Remote Control
on
page 71