Certification Information
iv
Certification Information
F.C.C. Information to User
This unit has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
unit generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this unit does cause harmful interference to radio
or television reception, which can be determined by turning the unit off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
³
Reorient or relocate the receiving antenna.
³
Increase the separation between the equipment and receiver.
³
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
³
Consult the dealer or an experienced radio/TV technician for help.
Independent Laboratory Testing
This unit has undergone extensive
certification testing both internally, at EXFO,
and externally, at an independent, qualified laboratory. All pre-qualification tests
were performed at EXFO while all final tests were performed at UltraTech
Engineering Labs Inc., a renowned test laboratory from Mississauga, Canada. This
guarantees the unerring objectivity and authoritative compliance of all test results.
Information to User
This equipment has been tested and found to comply with the limits for a Class B
digital device.
W
ARNING
Changes or modifications not expressly approved by EXFO
Electro-Optical Engineering Inc. could void the user’s authority to
operate the equipment.