Getting Started with Copper Qualification Tests
16
AXS-200/635
Regional Settings
Standard
The
Standard
tab allows you to set
unit parameter values for the selected
profile composed of current
Distance
Units
and
Cable Gauge
.
³
Standard
allows you to specify if
the copper qualification tests
should conform to the
ITU
(International
Telecommunications) or
ANSI
(American National Standards Institute) standard.
³
Temperature
allows you to specify the units of measurement for
temperature in
F
(Fahrenheit) or
C
(Celsius).
³
Connection
allows you to specify the default type of cable connections
as
T-R-G
or
A-B-E
.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press
to display the list.
3.
Use the up/down arrow keys to highlight the desired value, and press
to accept the value.
