Rev. 3
3
CONFIGURATION
3.1
Network Configuration
EGW1-MB-HT configuration is done through a configuration web page connecting the device to
the Ethernet network on which it is going to work.
To access to the configuration web page, you must connect EGW1-MB-HT to ethernet network
and install
Exemys Device Locator
software.
Download the
Exemys Device Locator
:
http://www.exemys.com/beta/software/edl_setup.exe
Once the device is connected, this will search for a DHCP server to obtain an IP address
automatically. We will search for it using the
Exemys Device Locator
software, which allows us
searching, identifying and configuring the basic network parameters. The rest of the configuration
is done from the configuration web page of the device.
In case you do not have a DHCP server, the
Exemys Device Locator
will find the device with
IP address 0.0.0.0, as shown in the figure below.
If you do not have a DHCP server, give it an IP address using the
Exemys Device Locator
button or using the methods explained in
Appendix B
.
The
Exemys Device Locator
buttons are:
Query Network
: Searches for all connected EXEMYS devices on the same network.
Properties ...
: Configuring Network Parameters (IP Address, Network Mask, Gateway)
Configure...
: Direct access to the configuration web page.
Summary of Contents for EGW1-MB-HT
Page 1: ...Rev 3 ...
Page 15: ...Rev 3 ...