background image

AmphibiCar 

Userʼs Guide

Model No.:

PR36

B

ATTERY

 I

NSTALLATION

 - R

EMOTE

C

ONTENTS

D

RIVING

1.   Make sure that the remote control is switched OFF. Use a 

 

small Phillips screwdriver to remove the battery  

 

 

compartment cover. 

2.   Insert 1 - 9V battery, making sure to properly match the  

 

polarity (+ and -). 

3.   Replace the cover and screw in fi rmly.   

Before using the 9.6 volt battery pack you must charge it. Follow the instructions on the battery 

charger for properly charging the battery. 

1.   The ON/OFF switch is located on the left side of the driverʼs seat. Make sure it is in the OFF    

 

position before you begin installing the battery. 

2.   Turn the latches on the hood of the AmphibiCar to unlock it then remove the hood. 

3.   Attach the battery pack connector to the matching connector on the AmphibiCar. DO NOT FORCE  

 

THEM TOGETHER. The connectors only fi t one way and should snap together easily. 

4.   Carefully tuck the battery wire into the battery compartment and  replace the hood, turning the   

 

latches to lock it into place. 

B

ATTERY

 I

NSTALLATION

 - A

MPHIBI

C

AR

F

ORWARD

Push both LEFT and RIGHT stick up. 

B

ACKWARD

Push both LEFT and RIGHT stick down. 

L

EFT

Push LEFT stick up. Press LEFT stick down 

to turn in reverse. 

R

IGHT

Push RIGHT stick up. Press RIGHT stick 

down to turn in reverse. 

F

ROM

 C

AR

 

TO

 B

OAT

Press the LEFT shoulder button to transform 

from a car to a boat (see Figure 2).

F

ROM

 B

OAT

 

TO

 C

AR

Press the RIGHT shoulder button to trans-

form from a boat into a car (see Figure 3).

T

RANSFORMING

L

IMITED

 R

ANGE

The remote control has a limited range. Should the vehicle exceed this range it will stop. Hold 

the control higher or move close to the unit to re-establish a signal. 

Install the antenna into the top of the controller, 

screwing it into place.

A

NTENNA

•  Please read the Userʼs Guide carefully before operating this product.

•  Children should not operate this product without parental supervision.

•  This product is designed for pool use. It may be used in ponds or small lakes provided that  

  there are no strong currents, waves, or water craft present which could create wakes.  Do  

  not use in any other body of water or in salt water.

•  Keep hands, hair, and loose objects such as clothing away from the wheels.

•  If an object becomes lodged in the wheels, make sure that this product is turned off before  

  attempting to dislodge.

•  Always inspect the pool area before use to insure it is free of hazards and/or obstacles,  

Always inspect the pool area before use to insure it is free of hazards and/or obstacles,  

  such as pool toys and etc.

•  Never ride into or over swimmers.

•  Always use caution and common sense.

•   Do not submerge the unit.

I

MPORTANT

 W

ARNINGS

Left Stick

Right Stick

O

PERATION

F

IGURE

 2

F

IGURE

 3

1.   Turn on the AmphibiCar (see Figure 1).

2.   Turn on the remote control (front center of unit). 

3.   Use the left and right stick to control the movement of  

 

the AmphibiCar. 

F

IGURE

 1

Reviews: