9
SOFTENER INSTALLATION AND USER GUIDE
BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM
2.3)
Setting Time of Day
2.4)
User Displays
When the system is operating, one of these given displays may be
shown. Pressing NEXT will alternate between the displays shown
below.
User 1
This user display shows the volume capacity remaining.
User 2
Displays current time of the day.
−
“SOFTENING” displays when the meter is registering the
water.
−
“REGEN TODAY” displays when the scheduled regeneration is
to occur at a scheduled time of day.
Push SET CLOCK button.
When hour flashes press
▲
or
▼
until the correct hour is displayed.
Then press NEXT.
The minutes will flash. Press
▲
or
▼
until the correct minute is
displayed. Press NEXT to return to the User Displays.
Time of day should only need to be set after power outages lasting
more than 8 hours, if the battery has been depleted and a power
outage occurs, or when daylight saving time begins or ends.
Return to User Display 1
