Exalt Installation and Management Guide
ExtendAir (TDD) Series Digital Microwave Radios
4
203591-010
2012-09-04
Basic Features
The ExtendAir (TDD) Series Digital Microwave Radios are intended for all-outdoor mounting and
come with an indoor-mounted power injector. In some cases, the radio can be mounted indoors or in an
enclosure. Depending on the configuration purchased, the associated antenna is either integrated as
part of the unit or connected separately.
For the integrated antenna models, the entire unit is typically mounted on a tower or rooftop mast
structure, with Ethernet/Power and other optional interface cables running from the unit location,
through a structure penetration, and to the power injector and connected communications equipment.
For the external antenna models, the unit is typically mounted very close to the external antenna to
minimize RF cabling and associated losses. Alternatively, the unit can be mounted at an easily
accessible location with longer RF cabling to the antenna. Proper lightning or surge suppression
devices and associated grounding are required for all connections.
Figure 2 Mounting and cabling—integrated antenna model
Summary of Contents for ExtendAir r40 series
Page 150: ...203591 010 2012 09 04...
