Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
202675-005
89
2011-08-30
Interfaces
RF
T1/E1 (up to x16)
DS3 (In and Out – up to 4 pairs)
OC3
Ethernet (copper)
Ethernet (SFP)
Connector
SMA-type female
Impedance
50 Ohms
Connector
RJ-45 (RJ48C), female
T1 Impedance
100 Ohms, balanced
T1 Line Codes
AMI, B8ZS, selectable
T1 LBO Settings (in ft.)
0–133, 133–266, 266–399, 399–533, 533–655
T1 Clocking Speed
1.544 Mbps
T1 Compliance
ANSI T1.102-1987; ITU-T; G.823; GR-49T-CORE
E1 Impedance
120 Ohms, balanced
E1 Line Codes
HDB3
E1 Clocking Speed
2.048 Mbps
E1 Compliance
CEPT-1; G.703; ITU-T-G703
Connector
BNC, female (x2, In/Out)
DS3 Impedance
75 Ohms, unbalanced
DS3 Line Code
B3ZS
DS3 LBO Settings (in ft.)
0–133, 133–266, 266–399, 399–533, 533–655
DS3 Clocking Speed
44.736 Mbps
DS3 Compliance
ANSI T1.102-1993; GR-499-CORE
Connector
SFP, Single-mode LC Transceiver
Line Code
Binary Scrambled NRZ CMI
Clocking Speed
155.52MHz
Compliance
ITU-T G.957; G.703 GR-253-CORE
RxTx
1310 nm (Short Range 15km) Rx: –31 to -7dBm, Tx: –15 to 0dBm
1310 nm (Long Range 40km) Rx: –35 to 0dBm, Tx: –5 to 0dBm
Connectors
RJ-45, female, auto-MDIX
Interface Speed
10, 100, or 1000 Mbps
Duplex
Half, full, auto, selectable
Compliance
802.3
Connectors
SFP
Interface Speed
1000 Mbps
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
