Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
6
202675-005
2011-08-30
through Telnet/CLI) to match the installed diplexer configuration. Additional information on this
configuration can be found in
Rear Panel Diplexer Orientation
and
.
Exalt recommends using the Exalt GUI for radio configuration. This interface requires a computer
with an Ethernet port and web browser software, such as Microsoft Internet Explorer 5.0 or above. See
for details on how to connect to and use the browser-based GUI
interface.
Shipping Box Contents
The radios are shipped as single terminals. Two terminals make up a
hop
, or link pair. An outer box
has labeling that indicates the contents of the box, with the part number and serial number details for
the radio terminals. The terminal box contains the following items:
•
Radio terminal
•
Accessory kit
– Rack mount brackets
– Bracket mounting hardware (8 x M4 screws; 8 x M4 wave washers)
– DC power connectors (2)
– Grounding hardware (1 x M5 screw; 1 x M5 wave washer; 2 x M5 flat washers)
•
Registration card
•
Quick-start guide
Each terminal requires a diplexer filter kit (sold separately) to operate. The diplexer filter kit contains
the following items:
•
Semi-rigid SMA cables for connecting the diplexer filter to the radio terminal
•
Mounting hardware
•
One 18" flexible SMA-to-N (F) cable for connection to a waveguide adapter (if applicable)
Exalt also sells the following item(s) separately:
•
N-to-CPR-137 waveguide flange adapters to connect to the primary waveguide (6GHz)
•
N-to-CPR-90 waveguide flange adapters to connect to the primary waveguide (11GHz)
•
Additional diplexers for redundant and other applications.
Inspect the outer packaging and the contents of the boxes upon receipt. If you suspect any shipping
damage or issues with the contents, contact Exalt Customer Care (see
Initial Configuration and Back-to-Back Bench Test
Every Exalt digital microwave radio goes through extensive quality testing and performance
evaluation over the full operating temperature range prior to shipment. However, before installation, it
is strongly advised to perform several tests and tasks that are much more difficult to perform once the
Note:
Register your system as soon as possible.
A 2-year Warranty period applies to
products registered within 90 days of purchase. The Warranty period is reduced to 1-year for
unregistered products and products registered after the first 90 days. See
.
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
