Operation
126
27891EN-900-02 / Edition 02/2017
12.9.2. SEQUENCE FROM ROUTINE OPERATIONS
›
Splash tray must be mounted.
›
Safety device at nip gap (gap 1) is mounted.
If a foreign object was pulled in, it can be helpful to mount the
safety bridge before reversing, depending on the employed safety
bridge.
1. Select menu item Settings
.
2. Select Setup
.
3. On the display, select reversing
.
4. Activate key switch (
b
) clockwise.
Fig. 109: Select
“Settings” / “Setup” / “Reversing”
Fig. 110: Key switch must be switched
5. Press start button reversing mode (
a
).
6. The rollers rotate in reverse at 30 rpm.
7. Remove foreign object out of nip gap (gap 1).
8. Lock key switch counter-clockwise. In that position, the key can be pulled off.
9. Press Back button
to return to routine operations.