Operation
114
27891EN-900-02 / Edition 02/2017
12.5. ADJUSTING THE ROLLERS
NOTE
Danger of destroying components:
It is possible to skip cleaning mode and start directly with adjustment.
›
ALWAYS CLEAN the machine before adjustment
.
›
Scraper swiveled off or dismounted (knife guard mounted).
›
Plastic guides dismounted.
›
Select "Adjustment"
.
During the adjustment process, a progress bar appears on the
display.
Fig. 90: Display during adjustment
Fig. 91: Adjustment finished, confirm with
a Progress bar
b To routine operations
c Adjusting the rollers (repeat
adjustment)
›
After finishing, dismount cleaning guard.
›
Confirm successful adjustment with
.
The machine changes to routine operations.
A mounted cleaning guard automatically calls up the cleaning
menu, you do not access routine operations.
a
b
c
g