Operation
106
27891EN-900-02 / Edition 02/2017
12 OPERATION
This section describes operation of the three roller mill:
›
Switching on the machine.
›
Cleaning the rollers.
›
Adjust the machine.
›
Defining the pre-settings (setup)
›
Routine operations: Test run with petroleum jelly.
WARNING
Danger of being pulled in by the rollers:
During operation, the rollers of the machine are driven.
This causes a danger of being pulled in.
›
When working at the machine, pay attention to your hands and
fingers.
›
For cleaning, set up the cleaning plate and change into cleaning
mode.
›
Only use the machine with the provided safety devices.
›
In routine operation, always work with the limiting jaws inserted to
the correct working width (according to the selected safety
device).
›
In routine operation, supply or remove product only with the
spatula.
›
Only use one-part spatulas or riveted spatulas with long handle.
›
ALWAYS keep the spatula as far away as possible from gap 1
(nip gap roller 1 and roller 2).
WARNING
Danger of scalding:
Danger of scalding or burns at the media and at hot machine parts
when handling hot temperature control media.
›
Before handling temperature control media, let them cool down.
›
Wear safety gloves and protective clothing.