www.exacq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
54
10
RS-232 and RS-485 Settings
NOTE:
RS-232 is not available on one-channel encoders.
Configuring RS-232
To configure RS-232, complete the following steps:
1.
From the
Remote Configuration menu
, select
Serial Port Settings
and then
232 Serial Port
to enter the RS-232
port setting interface:
NOTE:
If you want to connect the encoder by the RS-232 port, the parameters of the RS-232 should be exactly
the same as the parameters you configured here.
2.
Select the
Baud Rate
.
3.
Select the
Data Bit
.
4.
Select the
Stop Bit
.
5.
Select the
Parity
.
6.
Select the
Flow Ctrl
.
7.
Select the
Usage
.
8.
Click
Save
to save the settings.
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
