Exabyte 221L, Product Manual

Page: 99 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 83
V
IEWING
T
APE
D
RIVE
I
NFORMATION
V
IEWING
T
APE
D
RIVE
I
NFORMATION
From the Drive Status screens, you can view status information about the tape
drive(s), including the type of tape drive(s) installed and their operational
status. Tape drive information is updated whenever there is a change in drive
status.
Label Error Indicates if the bar code scan was successful (0) or displays an error condition:
60 – The bar code scanner could not read the bar code label because there was
no label on the cartridge.
62 – The bar code scanner could not read the label because the magazine is not
present.
64 – The bar code scanner could not read the label because the label checksum
is bad.
Sndvol Match
(Send Volume Match) Indicates whether the cartridge label matched the template sent with the last SCSI
SEND VOLUME TAG command (1) or not (0).
Source Displays the index of the last storage element from which the cartridge was
moved. If the Source displays “255,” the cartridge in that element has not been
moved since the last reset.
Address Displays the SCSI element address.
Reserved Indicates whether the element is reserved by a host (1) or not (0).
Rsv Host ID Displays the SCSI ID of the host that has reserved the element (if it is reserved).
Reserve ID Displays the ID that the element is reserved under. This is a number assigned by
a host when the reservation was made. If there is no reservation, the Reservation
ID and Host ID columns display “0.”
X Axis Displays the distance the robot must move along the X axis to the specified
element location.
W Axis Indicates the direction the robot must face to access the element. A value of 0
indicates the robot must face the front of the library; a value of 500 indicates the
robot must face the back of the library.
Total Puts/
Drive Loads
Shows the number of times the library placed a cartridge in the element. (If the
element is a slot, this field shows “Total Puts” since the last reset. If the element is
a tape drive, it shows “Drive Loads” since the first power-on.)
Total Put Retries/
Drive Reloads
Shows the number of times the library retried placing a cartridge in the element.
(If the element is a slot, this field shows “Total Put Retries” since the last reset. If
the element is a drive, it shows “Drive Reloads” since the first power-on.)
Total Pick Retries/
Drive Pick Retries
Shows the number of times the library retried picking from the element. (If the
element is a slot, this field shows “Total Pick Retries” since the last reset. If the
element is a drive, it shows “Drive Pick Reloads” since the first power-on.)
Table 5-4 Cartridge inventory field descriptions (continued)
Cartridge Inventory
Field
Description