Exabyte 221L, Product Manual

Page: 86 / 208

70
P
RODUCT
M
ANUAL
1014258
C
HAPTER
4—O
PERATING THE
L
IBRARY
Note: Your application software may use element addresses to identify elements
in the library. The difference between an element index and an element
address is that an index is a fixed number set in the library’s firmware,
whereas an address can be changed by your application software. The
library’s default element addresses correspond to the element indexes.
R
UNNING
D
EMOS
To run a demo:
1.
1. 1.
1. If necessary, disable security (see page 50 ).
2.
2. 2.
2. Change the robot mode to LCD (see page 54 ).
3.
3. 3.
3. Make sure there is at least one cartridge present and one empty slot before
you begin the test.
4. 4. 4. 4. Press
[MENU]
to display the menus. Press the down arrow key until “Demo
Menu” appears.
5. 5. 5. 5. Press
[ENTER]
. The following screens appear.
6.
6. 6.
6. Use the up or down arrow keys to indicate whether you want a tape drive
used in the demo. If you selected No, skip to step 7. If you selected Yes, press
[ENTER]
. The following screen appears.
Use the up or down arrow keys to indicate whether you want cartridges
loaded in the tape drive or just inserted into the drive opening during the
demo.
D e m o
M e n u
S e l e c t d e m o
i n p u t s :
U s e
D r i v e ? N
↑
L o a d
D r i v e ? N
↑