Design and function
Remote control
82
099-000118-EW501
24.11.2017
5.13.7.3 Up/down speed
Functionality
Press and hold the up push-button:
Increase current up to the maximum value (main current) set in the power source.
Press and hold the down push-button:
Decrease current to the minimum value.
Use the machine configuration menu
> see 5.18 chapter
to set the up/down speed parameter
which
determines the speed with which a current change becomes effective.
5.13.7.4 Current jump
By tapping the corresponding torch trigger the welding current can be determined in an adjustable jump
range. Each tap will cause the welding current to jump up or down by the defined value.
The “current jump” parameter
is set in the machine configuration menu
> see 5.18 chapter
.
5.13.7.5 Standard TIG torch (5-pole)
Standard torch with one torch trigger
Figure
Operating
elements
Explanation of symbols
BRT1 = torch trigger 1 (welding current on/off; secondary
current via tapping function)
Functions
Mode
Operating
elements
Welding current on/off
1
(ex works)
Secondary current (latched operation)
