Design and function
Interfaces
44
099-008724-EW501
08.01.2012
5.15.3
Connecting the Q-DOC 9000 V2.0 welding data documentation software
(Accessories: Set consisting of software, interface, connection leads)
The ideal tool for welding data documentation of, for example:
welding voltage and current, wire speed and motor current.
3
1
6
7
2
5
4
Figure 5-12
Item Symbol Description
0
1
7-pole connection socket (digital)
For connecting digital accessory components
2
Windows PC
3
RC300 tablet PC
4
SECINT X10 USB
5
Connection cable, 9-pole, serial
6
PCINT X10
7
Connection cable, 7-pole
Connection between switching cabinet and power source
CAUTION
Equipment damage or faults may occur if the PC is connected incorrectly!
Not using the SECINT X10USB interface results in equipment damage or faults in signal
transmission. The PC may be destroyed due to high frequency ignition pulses.
• Interface SECINT X10USB must be connected between the PC and the welding machine!
• The connection must only be made using the cables supplied (do not use any additional
extension cables)!
