Design and function
Machine configuration menu
42
099-002061-EW501
05.05.2020
5.10 Machine configuration menu
ENTER
NAVIGATION
EXIT
B
B
A
A
B
B
B
B
A
A
A
A
B
B
A
Figure 5-37
Display
Setting/selection
Calibration
The machine will be calibrated for approx 2 seconds each time it is switched on.
Exit the menu
Exit
Machine configuration
Settings for machine functions and parameter display
Welding current polarity switching
1
------- polarity switching at the RT PWS 1 19POL remote control (ex works)
------- polarity switching at the welding machine control
Time-based power-saving mode
> see 5.9 chapter
Time to activation of the power-saving mode in case of inactivity.
Setting
= disabled or numerical value 5-60 min..
Welding current actual value display
> see 4.2.1 chapter
------- Actual value display
------- Nominal value display
Use of accessories
------- Operation with wire feeder
------ Operation with foot-operated remote control
Service menu
Any changes to the service menu should be agreed with the authorised service person-
nel.
Software version of the machine control
Version display
