Technical data
Pico 160 cel puls
38
099-002129-EW501
15.10.2020
8
Technical data
Performance specifications and guarantee only in connection with original spare and replacement
parts!
8.1 Pico 160 cel puls
MMA
TIG
Welding current (I
2
)
5 A to 150 A
5 A to 160 A
Welding voltage according to standard (U
2
)
20,2 V to 26,0 V
10,2 V to 16,4 V
Duty cycle DC at 40° C
[1]
30 %
150 A
160 A
60 %
120 A
100 %
110 A
Mains voltage (Tolerance) / Frequency
1 x 230 V (-40 % to +15 %) / 50/60 Hz
mains fuse
[2]
1 x 20 A
Continuous primary current (100 %)
1 x 20 A
1 x 13 A
Open circuit voltage (U
0
)
94 V
Open circuit voltage (U
r
) VRD AUS
33 V
12 V
Open circuit voltage (U
r
) VRD RU
12 V
12 V
max. Connected load (S
1
)
7,3 kVA
4,9 kVA
Generator rating (Rec.)
9,9 kVA
Maximum mains impedance (@PCC)
[3]
xxx mOhm
Cos φ / efficiency
0,99 / 83 %
Protection class / Overvoltage category
Ⅰ
/
Ⅲ
Contamination level
3
Insulation class / protection classification
H / IP 23
Residual current circuit breaker
Type B (recommended)
Noise level
[4]
<70 dB(A)
Ambient temperature
-25 °C to +40 °C
Machine cooling / Torch cooling
Fan (AF) / gas
Mains connection cable
H07RN-F3G2,5
EMC class
16 mm
2
/ A
Safety marking
/ /
Standards used
See declaration of conformity (appliance documents)
Dimensions (l x b x h)
370 x 129 x 236 mm / 14.6 x 5.1 x 9.3 inch
Weight
4,9 kg / 10.8 lb.
[1]
Load cycle: 10 min. (60 % DC
≙
6 min. welding, 4 min. pause)
[2]
Safety fuses are recommended DIAZED xxA gG. When using automatic cutouts, the "C" trigger chara-
cteristic must be used.
[3]
This welding equipment does not comply with IEC 61000-3-12. When connecting a welding machine
to a public low-voltage supply system, the manufacturer or operator has to consult the electricity utili-
ties to make sure the welding machine may be connected.
[4]
Noise level during idle mode and operation under standard load according to IEC 60974
‑
1 at the ma-
ximum operating point.
